 |
Overall Rating from 33 Users
|
| Jacksonville - Florida |  October 30, 2009 | Was too thick to use. Would have put the motor up against the bottom of the unit. Had to reuse the old gasket.
| | West Palm Beach - Florida |  October 13, 2009 | Such an important element when changing out the motor that I think it should be included with the new motor and not sold as an accessory. This high quality dense foam gasket comes pre-cut for use in many sized applications. It's job is to seal the motor to the vacuum case, and cheap insurance for a high quality suction. A peel and stick application with quality glue, application is easy. Highly recommended with every motor change-out as the motor is held tight to the case by spring clips and is subject to vibration rub on this gasket.
| | DON M., HOUSTON - Texas |  August 21, 2009 | THE PAD SIZE IS TOO LARGE FOR THE MOTOR, ITS CIRCUMFERENCE OVERLAPS THE MOTOR BY ONE INCH. YOU HAVE TO TRIM IT OR INSTALL IT AS IS WITH THE OVERLAP.
| | More Reviews |
|
|
|  |
 |
