115330 Lamb Ametek MotorFor Filtex
(5/5 Stars) - Overall Rating from 45 Users
The Ametek Lamb 115330 Motor is used for central vacuums, industrial motors and blowers, and similar applications. It replaces all versions of the 115330 motor used in all types of industries spanning many decades. Older model 115330 motors may not be marked properly with the motor number and some may have 11-5330 or just a 5330. We do not recommend rebuilding these types of motors due to cost and technical precision for proper performance and longevity.
Specifications for model 115330 Lamb Ametek Motor:
- Genuine & New - Not Rebuilt - Stamped and Dated
- Ships the day ordered, if not the next business day
- 2-Stage, Peripheral Motor, Ball Bearings
- Diameter: 7.2 inch, Height: 6 inch
- Voltage: 110-120, Amps 13.4, Hz: 50/60
- Waterlift: 84.9", CFM: 115.7, AirWatts: 399
- Warranty: One Year Residential, 30-Day Commercial
- Guarantee: 100% Satisfaction 30-day Full Refund
Maintenance: No grease, oil, or tightening needed on the 115330 motor. The only recommended preventative maintenance is changing the motor brushes after several years or around the 300-500 hour half-life. The high quality of Ametek motors is recognized worldwide.
Instructions: How to Remove and Replace Your Central Vacuum Motor
FREE Shipping to 48 States. Excellent Shipping Options to Canada.
Motor 115330 is a replacement motor for:
- Central Vac International CV11
- Central Vac International CVS11
- Central Vac International CV11DP
- Central Vac International CVS11DP
- Pullman BIV-99
- Pullman BIV-102
- VSI Filtex TC600L
- & more!
Top Customer Reviews
February 06, 2023
Great product and fast shipping.
October 17, 2022
The motor went out on my Milwaukee Tool shop vacuum after 30 years of reliable operation and, unfortunately, the company no longer supplied parts or service for these older machines. I noticed a quot115330 Lambquot part number stamped on the motor housing and did an online search to see if the motor was still available. I was pleasantly surprised to find that it was. Centralvacuumonline.com had a picture of the motor which looked identical and the specifications which matched the size and amperage of the old motor. Based on consumer ratings and a great price I ordered a replacement and was not disappointed. The motor came in well packaged and faster than I expected. In a short time the vacuum was up and running like new again. I am very pleased with this company and recommend them to all in need of replacement vacuum parts.
Ask a Question
Motors have two carbon brushes that conduct electricity across an armature spinning in the center of the motor. The brushes start off at about 3/4 inches long and go down over time. There is a spring behind them applying pressure. By the time a motor has run 800-1100 hours, which is a life span, it is too late to change the brushes. The armature is worn, bearing are not as solid, and new brushes will grind down extremely quick. If you don't know how long your vacuum has been run you can check a couple things in order to find out if the brushes should be replaced. First see if the bearing are solid. Push on the center rod, the armature running from top to bottom, to see if there is any play. If there is any play then replace the motor. If it is solid then next check where the brushes rub on the armature. There are plates there that should be shiny and mostly clean. If they are pitted and blackened then replace the motor. If they look good then check the brushes. If the brushes are worn down to 3/8" then replace them both. Sometimes one wears much faster than the other.
Not finding the answer you are looking for?
Feel free to ask your question using the form below.
Ask your question below about our 115330-Lamb-Ametek-Motor
We will email our answer to you directly.