12ft Extension Hose
(4.8/5 Stars) - Overall Rating from 35 Users
12ft Extension Hose
This hose extension is a great addition to any home with a central vacuum system. Allow for 12 extra feet of cleaning range with this nifty extension! This extension hose is compatible for almost every hose style excluding direct connect hoses. Use this hose if you have one of the following hose styles:
- Low Voltage (switch on handle)
- Corded (3-way switch)
12ft extension hose is not compatible with direct connect hoses!
All you need to do is plug it in and gain extra cleaning range! Give us a call if you have any questions regarding this product. We will be glad to answer them!
Top Customer Reviews
July 14, 2021
April 26, 2021
works like a champ! we have a hose cover for the main hose amp I was able to stretch it over the the large connector to provide extra protection of our hardwood floors
Ask a Question
All Beam models had many different types of hoses so here is how to figure it out: If the hose has an electric cord on the wall end then you can use the extension but the cord would need an extension cord on it. If your hose has two pins on the wall end then the extenion is not compatible. If your hose has no cords and no pins it is compatible.
Direct Connection hoses have two metal round pins that slide into two small electric holes above the suction hole in the inlet faceplate. If you don't have two pins on the wall end of your hose then the Extension Hose is compatible.
Please verify if your inlet valve measures 1-1/2 ID or just a bit less. There is not a raised part on the wall end of the extension hose. If your raised part starts the suction by engaging something then this hose will not work for you. But if you are talked about a tab of plastic that doesn't engage anything electrical then yes, this hose will work for you.
Compatibility: 1) air or basic hoses (no switch on handle), 2) low voltage hoses (switch on handle), and 3) corded electric hoses (three way switch). NOT compatible with direct connect electrical hoses (two pin connection on wall end of hose). Systems with a 1-1/4 inch diameter inlet hole can be adapted, please let us know to determine how.
Compatibility: 1-1/2 diameter 1) air or basic hoses (no switch on handle), 2) low voltage hoses (switch on handle), and 3) corded electric hoses (three way switch). NOT compatible with direct connect electrical hoses. Systems with a 1-1/4 inch diameter inlet hole can be adapted. If you have a 1-1/4 diameter inlet valve, please let us know.
Yes, you can use more than one Low Voltage Extension. However, please note the following:
Using multiple extensions:
• Will add bulk to the hose making it awkward to use
• May decrease overall suction
• May effect on/off switch functionality
Not finding the answer you are looking for?
Feel free to ask your question using the form below.