119631 Lamb Ametek Motor
(4.8/5 Stars) - Overall Rating from 117 Users
The Ametek Lamb 119631 Motor for central vacuums, blowers, and similar applications replaces all versions of the 119631 motor used in all types of industries spanning many decades. Older model 119631 motors may not be marked properly with the motor number and some may have 11-9631 or just a 9631. We do not recommend rebuilding these types of motors due to cost and technical precision for proper performance and longevity.
Replaces 6600-001 including HL10 P-9 ECD. Also, clip the wires from the old motor to splice into the new motor wires. Need wire nuts and possibly washers to make up 1/8" difference on bolt threads when tightening.
Specifications for model 119631 Lamb Ametek Motor:
- Genuine & New - Not Rebuilt - Stamped and Dated
- Ships the day ordered, if not the next business day
- 2-Stage, Tangential Bypass Motor, Ball Bearings
- Diameter: 5.7 inch, Height: 7 inch
- Voltage: 110-120, Amps 14.4, Hz: 50/60
- Waterlift: 128", CFM: 114, AirWatts: 515
- Warranty: One Year Residential, 30-Day Commercial
- Guarantee: 100% Satisfaction 30-day Full Refund
Maintenance: No grease, oil, or tightening needed on the 119631 motor. The only recommended preventative maintenance is changing the motor brushes after several years or around the 300-500 hour half-life. The high quality of Ametek motors is recognized worldwide.
Instructions: How to Remove and Replace Your Central Vacuum Motor
FREE Shipping to 48 States. Excellent Shipping Options to Canada.
Top Customer Reviews
January 17, 2022
The motor is actually quieter then the old motor when it was new .
December 25, 2021
This motor works great amp great price. You want this one with the bulge on the bottom because it as a result has a higher flow rate vs the model with a flat bottom. The metal mounting flange thickness is 18quot thinner than the original plastic so you will need rubber washers to make up the difference (do NOT use metal washers). If you want to reground the new motor (not really necessary) then use a self threading screw in a hole at the top of the motor housing to attach the ground wire. I would give this 5 stars but the rubber washers should have been provided- luckily I had some amp avoided a trip the the HW store.
Ask a Question
Yes, the 119631 Lamb Ametek Motor will fit a Beam 750A model.
The burnt smell of a vacuum motor indicates it over heated and scorched the armature where the brushes set. This means you need a new motor.
If the exisiting motor in your unit is the Lamb Ametek 115334, we recommend using a Replacement Lamb Ametek 115334 Motor.
Yes, this is the referenced replacement motor for your Electrolux E130F.
Not finding the answer you are looking for?
Feel free to ask your question using the form below.
Ask your question below about our 119631-Lamb-Ametek-Motor
We will email our answer to you directly.