Vacuum Unit Circuit Board 15a 120v

  (4.8/5 Stars) - Overall Rating from 218 Users

Part # M-CB15A
Our Price:
$69.60
In Stock

Vacuum Unit Circuit Board 15a 120v

Circuit board for single motor vacuum units. Will not work with all central vacuums.


For your convenience we have added some articles on how to replace or upgrade your circuit board.

Top Customer Reviews


(5/5 Stars)


September 21, 2024

They were so helpful figuring out exactly what replacement part I needed for a Nutone whole house vacuum when I called. Highly recommend!!

- California

(5/5 Stars)


July 26, 2024

the board worked well. Easy to install.

- Alabama

Ask a Question

Hayden 6000
Question: I HAVE A HAYDEN SUPERVAC 6000. WHICH CIRCUIT BOARD SHOULD I BUY?
CVO's Answer:
This is the correct board. The single motor board part number M-CB15A.
Hoover Replacement
Question: Hi there, Would this fit a Hoover SH80520? Thanks in advance for your help! Dave
CVO's Answer:
If your Hoover is a central vacuum 110 volt then it will work perfectly. It may need some retrofit to attach but will function fine.
Facso 851 Compatible?
Question: Will this work on my model 851 fasco unit?
CVO's Answer:
This board will work on all single motor Fasco units such as the 851. You may have to retrofit it into the side of the unit but that is what many do as a good alternative to relay/transformer/minibreaker replacement.
Question: Is this the right board for an aerus by elecrolux vacum?
CVO's Answer:
This circuit board is a universal board for all 110v-120v central vacuum systems with a single motor that does not exceed 15 amps. Please note that some modification may be required for mounting purposes.
Compatible With Dirt Devil CV950?
Question: Will this ckt board work with Dirt Devil CV950 which uses an H.P. Products part nr 7091 ckt board? Thank you.
CVO's Answer:
Unfortunately, we do not have a reference to your Dirt Devil CV950. The circuit boards we offer are universal, which means that if you have a single motor that is 120V and handles up to 15amps, it will be compatible. You may need to remount the circuit board as it's dimensions may be different than your current board, but the parts of the circuit board will be compatible.
Is This Compatible With Aerus?
Question: will m-cb 15a replace a Aerus 2xa in my centralux vacuum system
CVO's Answer:
Yes, Part # M-CB15A will be a compatible replacement for your central vacuum unit. You can view/purchase this item by clicking the following link: Circuit Board.
Breaker for 24 Volts?
Question: The low voltage op ... is it 24volts? I see one pic show a cct board with one breaker and then the next pic shows 2 breakers Is the one breaker low voltage 24 V?
CVO's Answer:
Low voltage on the boards is 24 volts. The minibreakers are not part of the low voltage, just the high voltage. If there are two breakers that would be a board for two motors.
Compatible With Galaxie 100?
Question: which circuit board is a replacement for the Galaxie 100 model ?
CVO's Answer:
You can use our single motor circuit board found here: Circuit Board M-CB15A. Please note that some modification may be required for mounting purposes.
Compatible With Hayden 3600?
Question: Will this board work on my Hayden 3600?
CVO's Answer:
Yes, this board is compatible with your Hayden 3600. Please note that modification to the unit (such as drilling an additional hole) may be required for proper mounting.
Beam 2725 Board?
Question: Is this compatible with Beam 2725?
CVO's Answer:
Yes, item #M-CB15A - Universal Vacuum Control Board is a compatible replacement for your Beam Central Vacuum System. However, we recommend item #M-CB15AB - Beam Control Board as an exact replacement to avoid any modifications.
Replacement Circuit Board
Question: I have a AirVac model ZX6000 it is a single motor 120VAC 15AMPS 60Hz It runs continuously even with the low voltage leads disconnected. Will the M-CB15A be a good fit for this system?
CVO's Answer:

This circuit board contains the electrical components necessary to operate your system, but please note that it is a universal board. This means it may not be an exact replacement. It may require that it be remounted in your canister if it is not the same dimensions as your current board.

Replacement Circuit Board
Question: Will this work on a Beam 297S? I am also replacing the motor with a Ametek Lamb # 117507.
CVO's Answer:

This circuit board is universal, meaning it has the necessary components to properly operate your system, but it may not be an exact replacement. The dimensions of the board may be different and require that you remount the new board within your system.

Circuit Board Replacement
Question: Good morning I have a bean central vacuum system 677S 914 11018 Model prod no see no My unit won't turn off I have check all the inlets also have remove the low voltage cables from the unit unplug the unit and still won't turn off.. I have done some research and trouble shooting states the the pc board is faulty I was wondering if I can order a pc board for this unit from you Also need to know the part number and cost.. Thank you for your time is this matter Jorge florez 16000 75th place west Edmonds, WA 98026 425 750 5803 Pugetsoundecc@comcast.net Sincerely Jorge Florez
CVO's Answer:

We offer a universal replacement circuit board that would be compatible for your system. Please note that this board contains the necessary components to operate your system, but may not be an exact replacement for your existing board. For this reason, you may need to remount this board in your system.

Bypass Circuit Board to Test Motor
Question: How can you trouble shoot a Hayden 3600 circuit board? How do you bypass it to eliminate it as the problem? Vacuum will not work.
CVO's Answer:

You can put 110 volts directly to the motor lead wires but you have to run it for 10 minutes to see if the motor is good. Bad motors look good after they have been handled, but if they are going bad they will shut off by themselves within 10 minutes or so.

Duo-Vac / Symphonia Replacement Circuit Board
Question: I need a DouVac single motor circuit board to support a Symphonia SYM-02a. Do you offer such a part?
CVO's Answer:

You can view our Universal Circuit Board for the DuoVac / Symphonia SYM-02A on our website. Please note that this board is considered universal. This means it contains the necessary components to operate your system, but may have different dimensions than your current board. You may need to remount the board in your canister if this is the case.

Compatible with Beam 750?
Question: Does this board work on a Beam model 750?
CVO's Answer:

Yes, our Vacuum Unit Circuit Board 15a 120V will work on your Beam 750 central vacuum system.

Question: Will the M-CB15A circuit board work with the 115672 motor for a VacuMaid S-1600 unit. Thanks
CVO's Answer:

Hello and thank you for contacting Central Vacuum Online.  Yes, the M-CB15A is a compatible board. This board is a universal style board and will wore the same as your current board, you may have to alter the canister in order for it to mount properly. Thank you!

Question: We have a Eureka Central Vacuum CV140 in our trailer. We need a new board and was hoping this one is the one we need Part # M-CB15A. Will it work?
CVO's Answer:

Hello and thank you for contacting Central Vacuum Online my name is Ally and I am happy to assist you today. I cannot find reference to your Model # (CV140). This is a generic board designed to work with Single Motor, 120v, under 15 amps. If your units specs match the above specs, this is the correct board for you.

Question: is this the replacement for the electrolux model e130a
CVO's Answer:

Hello and thank you for contacting Central Vacuum Online my name is Ally and I am happy to assist you today.

This is the generic replacement for any single motor, 120v, unit under 15 amps. It will wire the same as the original circuit board but may require alteration of your canister to mount is correctly. 

I have reference to a Electrolux E130F and a E130F model # and they are both single motor, 120v, unit under 15 amps. I do not see reference to your model #. Please compare the specs listed above to be sure. 

Question: I have a Hayden SuperVac Premier, will this circuit board work?
CVO's Answer:

Hello and thank you for contacting Central Vacuum Online my name is Ally and I am happy to assist you today. I see that the Hayden Premier is a single motor, 120v, under 15 amps. This is the generic replacement for any single motor, 120v, unit under 15 amps. It will wire the same as the original circuit board but may require alteration of your canister to mount is correctly. 

Question: WILL THIS BOARD FIT ELECTROLUX CENTRAL UNIT #1590
CVO's Answer:

Hello and thank you for contacting Central Vacuum Online my name is Ally and I am happy to assist you today.

This is the generic replacement for any single motor, 120v, unit under 15 amps. It will wire the same as the original circuit board but may require alteration of your canister to mount it correctly. 

Question: Will this work on my beam 875b
CVO's Answer:

Hello and thank you for contacting Central Vacuum Online my name is Ally and I am happy to assist you today.

Part # M-CB15AB is the recommended Circuit Board for the Beam model # 875B. Please click the link and compare to your current board to be safe. Thank you. 

Question: Will this fit a zanex 375 unit? Is 15 amps sufficient?
CVO's Answer:

Hello and thank you for contacting Central Vacuum Online my name is Ally and I am happy to assist you today.

Vacuum Unit Circuit Board 15amp 120v is the proper replacement board for your central vacuum system. We determine compatibility based on the specifications of your unit. Please keep in mind this is the generic replacement for any single motor, 120v, unit under 15 amps. It will wire the same as the original circuit board but may require alteration of your canister to mount it correctly. 

Question: Is the board MPN is PC120ST and or made for Vacu-Maid serial # S2600? If so, what is the manufacture warranty?
CVO's Answer:

Hello and thank you for contacting Central Vacuum Online my name is Ally and I am happy to assist you today.

This generic/universal circuit board will have a 2-year warranty through www.centralvacuumonline.com. This 2-year warranty exceeds the manufacturer warranty. 

Question: Will circuit board Part # M-CB15A work for Easy Flow EF 1500? Unit is 120v, 13amp, 60 Hz.
CVO's Answer:

Yes, that would be compatible with your Easy Flow EF1500.

Question: Will this circuit board work with beam model 353?
Question: Will this work on nutone cv-353w single motor?
CVO's Answer:

Yes, that circuit board is compatible with your NuTone CV353W.

Question: Will this circuit board #M-CB15A fit the Aerus Central Lux E130K serial number T 16316 D, 120 volts 13 amps 60 hz?
CVO's Answer:

Unfortunately, your Aerus Central Lux E130k is not on our list. There for that would not be compatible.

Question: I have a Hayden Super vac Premier model serial 0806234 will this board work as a replacement for the stock one? Also I have a LED light for Ser icing etc on the front does this board have the connection for it? My board has theses numbers 7918-02 AM 7256 Underneath that set of numbers is this 8766-00-369 G06
CVO's Answer:

Yes, that would be compatible with your Hayden Super Vac Premier. 

Question: Good afternoon. I replaced my original circuit board for my Hayden Supor premier model with this circuit board. Part # M-CB15A my question is my old existing board had one ground wire coming off of the board and it had a connection for the LED back track light in the front. The new board has two yellow wires coming from it does one of those need to be grounded and one of them power LED for the track system what are the wires for?
CVO's Answer:

The wires are low voltage wires that  go to an on/off low voltage switch on the side of the tank if you have one, if not they can be ignored.

Question: Is part#M-CB15A compatible with Nutone CV-353?
CVO's Answer:

Yes, the circuit board is compatible with your NuTone CV-353.

Question: We have a husky storm model STR-190 i-na-h. We have already replaced the motor and I'm pretty sure that this is the correct circuit board we need. Would you please confirm?
CVO's Answer:

Unfortunately, we do not have a compatible board for your Husky Stom Model STR-190.

 

 


Not finding the answer you are looking for?
Feel free to ask your question using the form below.

Ask your question below about our 15amp-120v-Circuit-Board

We will email our answer to you directly.

Email Address

* Maximum 800 characters.